柔性线棒 |
|
如何确定¢28mm柔性线棒的长度 |
How to calculate zhe length of ¢28mm standard lean pipe |
管材样品图
|
¢28mm标准金属接头 |
---|
Masterpipings ¢28mm Standard MetalConnector |
标准金属接头¢28mm接头说明 | ||
---|---|---|
材料 Material: | 钢铁 Steel | |
颜色 Color: | 亮铬 Shiny chrome-plated | |
黑色 Black |
A. 在本例中所有金属接头都是相对于80Kg(176lnbs)的水平或垂直拉力而言的,且这些测试中的拉力是在温室下以5mm/min的速度作用于物体上。 | |||
The strength of all metal connector are relative to 80Kg(176lbs)horizontal or vertical pull force,the pullforce during there test are applied on the object at the speed of 5mm/min under the room temperature.
|
|||
HJ-1P | HJ-4P | ||
可承载Carry-80Kg | 可承载Carry-80Kg | ||
Loadable force-80Kg | Loadable force-80Kg | ||
HJ-2P/HJ-3P | HJ-5P | ||
可承载Carry-80Kg | 可承载Carry-80Kg | ||
Loadable force-80Kg | Loadable force-80Kg |
实验条件 |
---|
在温室下一个向下的外力以3Kg/min的速度均匀作用在架子上。 |
Under the room femperature a downward exernal force evenly applies on zhe shelf at the speed of 3Kg/min.
|
注意:在上述例子中用于连接用的金属接头的转距为9.8mm(100Kg'cm或71/41B'FT)。这些结果不适用其他的转距值或使用其他的管子而不是TimFung标准管。同样目前这些测试结果是没有附加任何安全因素的。 |
Note:In the above example,Torgue of connector is 9.8mm(100Kg'cm or 71/41B'FT),These result is not applicable to other torque value or other pipe except Masterpipings standard pipe .At present,these test results are not take any safty factors into consideration. |